Hello everybody. Here you'll find a video tutorial about how to flash the MK802 II firmware.
Tools Needed
1. Phoenix Card Tool - download version 306_20120302 from here.
2. Minimum 1 GB micro SD card.
3. Micro SD card writer/reader.
4. Windows OS
5. Firmware upgrade image file (.img). Download Rikomagic MK802II version 20121205 from here.
Tools Needed
1. Phoenix Card Tool - download version 306_20120302 from here.
2. Minimum 1 GB micro SD card.
3. Micro SD card writer/reader.
4. Windows OS
5. Firmware upgrade image file (.img). Download Rikomagic MK802II version 20121205 from here.
Steps
1. Plug in your micro SD card writer with micro SD card inserted
2. Run PhoenixCard.exe
3. Select Disk Drive
4. Select Image File
5. Select Write Mode - Product
6. Burn
7. After image is written to micro SD card, just pull out and insert the micro SD Card into MK802II device
8. Power on MK802II, wait for 4-5 minutes, untill the power indicator (blue light) will automatically turn off
9. Remove the micro SD card and power on MK802II again.
10. Firmware successfully upgraded.
article via http://chinagadgetsreviews.blogspot.com
8 comentarii:
Does it work on rom u1a ???
http://www.measy.com.cn/product/showproduct47_en.htm
Buna
Am incercat sa foloesc PhenixCard 3.06 si sa pun imaginea pe un microSD folosind unitatea de SDcard interna, a laptopului. Apas Burn si dupa o vreme primes o eroare:
card preprocess failed
Am incercat aceasi operatie pe doua laptopuri diferite si obtin aceasi eroare.
Mentionez ca pot scrie/citi cardul fara probleme in windows, deci cardul nu e stricat.
Care ar putea fi problema?
Exista optiunea de schimbare a firmware pe Serioux S101TAB si prin alte metodem, de ex prin cablu USB?
Multumesc
After i update my firmware , i can use my mk802II only 5 minutes and then it will freeze and not working again.
What should i do i repeat several time but its not working
Aplicatie este ok din cate am citit dar este compatibila 50% cu ce aveti dvs acasa ( sd card/cititor de carduri ).
Eu am incercat pe 4 calculatoare diferite si degeaba.
Total inutila pt.mine.
Before using PhoenixCard You have previously formatted properly SD card to fat32. Then there will be errors in PhoenixCard.
It is good to cut a hole in the casing on the side of the processor and place the heat sink. Then there will be freezing.
Link to stock firmware file is dead.
nu bun, nimic!!!!
LASATI FRATE LINK LA IMAGINE CA NU SE GASESTE NICAERI
Trimiteți un comentariu